Industrial freezers and refrigerators, uprights and chests
  for industrial, lab, medical, scientific, temps as low as -85C.
Industrial Freezer Sales
A Division of IDS

     Walk-in Cold Room           

Phone (818) 597-4300    
Email: service@freezerlink.com
      

Home      Products      Search      Price List      Custom Quotes      About IDS

Walk-in Indoor Cold Rooms and Outdoor Cold Rooms, 3 heights available on both Indoor and outdoor models. Environmental rooms and stability chambers reproduce and closely monitor any environment with precise combination of humidity and temperature climates to meet testing and storage needs. Applications include stability storage, biological research, shelf-life testing and more. Options,   Warranty.

Click here to request a quote.

Walk-ins are built of modular panels, and are insulated with foamed-in-place polyurethane insulation. Each panel is designed to ensure ease of installation, long term reliability and high insulating efficiency. All panels are manufactured with male and female mating rails to ensure proper alignment during installation. The polyurethane insulation wraps around the return bend metal seams on both section to create a lightweight panel of exceptional strength and durability. All panels are a full four (4) inches thick and provide a superior insulating value. The foamed-in-place cam locking fasteners ensure an airtight seal for maximum energy efficiency.

Panel gaskets around the outer perimeter of the panel are continuous, without cuts or breaks at corners. The gasket design provides a foamed-in-place gasket as an integral part of the panel. Gaskets cannot fall off or pull off during shipment or installation. Panels lock together tightly to assure an energy efficient walk-in. Edge caps for ends of floor and ceiling panels are foamed-in-place rather than overlapped or mechanically fastened. Edge caps cannot come loose, and they stay in place through the life of the walk-in. Interior and exterior surfaces are 26 gauge corrosion-resistant stucco embossed coated steel. Models supplied with a floor will include a smooth aluminum interior floor surface.

Insulation: Panels are four (4) inches thick, metal clad and foamed-in-place with HFC-134a polyurethane insulation which is CFC and HCFC free.

Each Walk-in Room is equipped with a 26” wide door. The height of the door opening varies with the series of Walk-in ordered. The 6' unit has a 59” high door, the 6’7” high has a 66” high door and the 7'6" Walk-ins have a 78” high door. The door is self-closing, flush mounted and constructed to incorporate heavy duty, molded ABS breaker which is permanently foamed-in-place. Each unit can be supplied with a variety of Walk-in Options.

Indoor Cold Room and Outdoor Cold Room Standard Features:

• Temperatures: +4C., -20C., -30C., 0C. to 55C.
• Ceiling or wall mounted refrigeration system.
• Five year compressor warranty.
• Air-cooled condensing unit.
• Ideal for stability testing at 25C.and 40C.
• 26 gauge embossed galvanized with aluminum coating on all surfaces.
• Smooth aluminum interior floor (on models with floor).
• Floorless models supplied with NSF listed vinyl sealers.
• Standard Models are stocked for 7 day shipment.
• Full 4" thick panels foamed-in-place.
• HFC-134a polyurethane insulation, CFC and HCFC free.
• 26" wide self-closing doors.
• Two heavy duty cam-lift hinges per door (hydraulic closer).
• Positive action door closer.
• Deadbolt locking handle.
• Independent key/padlock, inside safety release, magnetic gasket.
• Floor double sweep gasket, perimeter heater wire.
• Vapor-proof light with constant burning night light feature.
• Switch and pilot light.

• White membrane roof and trim.
• Refrigeration hood.
• Door hood (optional).
• -30C ambient controls.

• USDA accepted.
• NSF, UL flame spread 25 on all panels.
• Registered by UL to ISO 9001.
• UL and CSA electrical listing on door sections.
• UL and CSA electrical listing on refrigeration systems.
• City of New York (MEA) listed
• City of Houston listed
• Oregon State listed
• City of LA listed
• California State listed
• Fifteen year panel warranty
• One year labor/service warranty

• Microprocessor based control panel.*
• Chart recorder.*
• Humidification on 0 to 55C rooms, Provides ambient to 95%
  at 4C - 40C and 90% at 41C. - 55oC.*
• Dehumidification*
• Duplex electrical outlets (surface mounted).*
• Hi/Lo alarm.*
• Exterior Ramp.*
• Viewport door.*
• Shelving Kits.*
• Heater kits.*
• Exterior ramp.*
• U-shaped shelving system.
• Duplex electrical outlets (recessed).
• Shelving system ledges.
• Floor tread plate kit.
• Condensing unit air deflector kit.
• Heater kit for cooler located outdoors in below 0C. ambient.
• Leak detector/alarm (may be a requirement in some areas).
• Transformer kit.
• Water-cooled condensing unit.
• Three phase electrical.
• Remote refrigeration systems.

* Options that meet Express 10 Day Availability