4100017-1 = Access Port 1" (Super and Ultra Cold Chest models only)
INTENDED FOR USE WITH IDS CHEST MODELS OR COLD CUBES ONLY.
Order at time of construction only.
1" Diameter access port with rubber plug, intended for third part temperature probes or other requirements to cable inside the chamber. Because of the refrigerant lines, it is difficult to be exact with the position. For Super and Ultra Cold models only, the ports can go in the side wall. Please indicate in the "Note to Seller" box at checkout the general desired location as you look at the freezer. For example: "Left Hand Wall, Centered".
You may also consider some of these products. Contact an IDS representative if you have any questions!
AD2000 = Auto Dial Alarm System For IDS Chest Models or Cold Cubes.
Pre-Program up to 8 different phone numbers and keep attached to a land line. The auto dial alarm will alert your staff as soon as temperature rises above your desired alarm set point. Price includes installation. Make sure to speak with IDS directly before ordering.
300200 = 7 Day Paper Chart Recorder
Intended to be Ordered at time of construction . Specify readout in degrees C or F in the "Note To Seller" box at checkout.
MODERATE COLD CHEST FREEZERS REQUIRE AN END RACK FOR MOUNTING THE RECORDER TO THE UNIT.
6" Diameter used on most chest models. 4" diameter used for benchtop models. Most customers use the 7 day setting, but it can be changed to 24 hour if preferred. Contact IDS with any questions.
5001-6 = CalGrafix Digital Temperature Data Logging Software and USB port with 10 feet of cable
INTENDED FOR USE WITH IDS CHEST MODELS OR COLD CUBES ONLY. Moderate Cold Chest Freezers Require a End Rack and Cal9500 upgrade to use this system.
Calgrafix Software Package - Features loggings, charting, alarm indication, networking and configuration when connected to a Windows based user interface. Must be constantly attached to your PC by the USB cable. Digital Data Logging is quickly replacing the paper chart monitor. Contact IDS with questions.