4100017-4 = Access Port 4" (SUPER & ULTRA COLD chest models only)
Order at time of construction only.
2" Diameter access port with rubber plug, intended for third part temperature probes or other requirements to cable inside the chamber. Because of the refrigerant lines, it is difficult to be exact with the position. Please indicate in the "Note to Seller" box at checkout the general desired location as you look at the freezer. For example: "Left Hand Wall, Centered".
You may also consider some of these products. Contact an IDS representative if you have any questions!
300200 = 7 Day Paper Chart Recorder
INTENDED FOR USE WITH IDS CHEST MODELS OR COLD CUBES ONLY.
Intended to be Ordered at time of construction . Specify readout in degrees C or F in the "Note To Seller" box at checkout.
MODERATE COLD CHEST FREEZERS REQUIRE AN END RACK FOR MOUNTING THE RECORDER TO THE UNIT.
6" Diameter used on most chest models. 4" diameter used for benchtop models. Most customers use the 7 day setting, but it can be changed to 24 hour if preferred. 50 chart sheets included, 1 week standard chart unless otherwise specified with the order. Contact IDS with any questions.
410012 = CO2 Back up system including factory installation
Intended to be Ordered at time of construction . Contact IDS with questions
Operated by a rechargeable gel cell battery and back up thermostat that is automatically activated by any temperature rise above the set point. Ready to attach to your CO2 cylinder.