5006-9 = Stainless Steel Interior Lining - Super or Ultra Cold Interior (12, 21CF sizes)
Intended for IDS SUPER AND ULTRA COLD CHEST FREEZERS ONLY. Contact an IDS representative for help in placing your order.
You may also consider some of these products. Contact an IDS representative if you have any questions!
300200 = 7 Day Paper Chart Recorder
Intended to be Ordered at time of construction . Specify readout in degrees C or F in the "Note To Seller" box at checkout.
MODERATE COLD CHEST FREEZERS REQUIRE AN END RACK FOR MOUNTING THE RECORDER TO THE UNIT.
6" Diameter used on most chest models. 4" diameter used for benchtop models. Most customers use the 7 day setting, but it can be changed to 24 hour if preferred. Contact IDS with any questions.
4100017-1 = Access Port 1" (Super and Ultra Cold Chest models only)
INTENDED FOR USE WITH IDS CHEST MODELS OR COLD CUBES ONLY.
Order at time of construction only.
1" Diameter access port with rubber plug, intended for third part temperature probes or other requirements to cable inside the chamber. Because of the refrigerant lines, it is difficult to be exact with the position. For Super and Ultra Cold models only, the ports can go in the side wall. Please indicate in the "Note to Seller" box at checkout the general desired location as you look at the freezer. For example: "Left Hand Wall, Centered".