2003004EX = (-80C) 21 CF Ultra Cold Chest Freezer, 230V - Built To Meet Class 1 Div. 1 Group C&D Explosion Proof Specifications
LOADING DOCK SHIPPING INCLUDED - Must be a commercial address in the continental US that can receive a loading dock shipment. Build time may vary but is usually 12-14 weeks. An "Explosion Proof" freezer means it can not create a spark hazard on the inside or outside of the freezer when installed.
18 months parts and labor warranty. For warranty information CLICK HERE.
Unit is not UL Listed, Must be field tested once it is in place and hard wired.
Must be hard wired per Specification code.
For more information on the Class 1 Division 1 Group C&D build, CLICK HERE.
230v Model only. 115V not available at this time.
The voltage can be 208 - 230V (60 hz) or 220-240V (50 or 60 hz). SJO power cord does not include plug and the plug must be added or the unit must be hard wired when installed on site.
You may also consider some of these products. Contact an IDS representative if you have any questions!
EPTR4-20 = Explosion Proof Temperature Retransmit (4-20 ma)
Explosion Proof Temperature Retransmit (4-20 ma) **Has Power Supply Separate From Freezer. Customer is responsible for correctly installing and running wires from freezer per Explosion Proof Class 1 Div 1 Group C&D code**
Only intended for installation while building the freezer, works with any IDS Explosion Proof model.
5006-9 = Stainless Steel Interior Lining - Super or Ultra Cold Interior (12, 21CF sizes)
Intended for IDS SUPER AND ULTRA COLD CHEST FREEZERS ONLY. Contact an IDS representative for help in placing your order.
4100017-1 = Access Port 1" (Super and Ultra Cold Chest models only)
INTENDED FOR USE WITH IDS CHEST MODELS OR COLD CUBES ONLY.
Order at time of construction only.
1" Diameter access port with rubber plug, intended for third part temperature probes or other requirements to cable inside the chamber. Because of the refrigerant lines, it is difficult to be exact with the position. For Super and Ultra Cold models only, the ports can go in the side wall. Please indicate in the "Note to Seller" box at checkout the general desired location as you look at the freezer. For example: "Left Hand Wall, Centered".
4100017-2 = Access Port 2" (SUPER & ULTRA COLD CHEST MODELS ONLY)
INTENDED FOR USE WITH IDS CHEST MODELS OR COLD CUBES ONLY.
Order at time of construction only.
2" Diameter access port with rubber plug, intended for third part temperature probes or other requirements to cable inside the chamber. Because of the refrigerant lines, it is difficult to be exact with the position. For Super and Ultra Cold models only, the ports can go in the side wall. Please indicate in the "Note to Seller" box at checkout the general desired location as you look at the freezer. For example: "Left Hand Wall, Centered".
4100017-4 = Access Port 4" (SUPER & ULTRA COLD chest models only)
Order at time of construction only.
2" Diameter access port with rubber plug, intended for third part temperature probes or other requirements to cable inside the chamber. Because of the refrigerant lines, it is difficult to be exact with the position. Please indicate in the "Note to Seller" box at checkout the general desired location as you look at the freezer. For example: "Left Hand Wall, Centered".
